Fri Oct 13, 2017 @ 8:00AM - 05:00PM
Renovation day 2017
European Aluminium would like to participate in the Renovation day which will take place during 13th October 2017 in Brussels, Belgium.
Renovate Europe is a political communications campaign with the ambition to reduce the energy demand of the EU building stock by 80% by 2050 compared to 2005 levels through legislation and ambitious renovation programmes. This will bring the energy performance of the entire building stock in the EU to an NZEB performance level.
Mon Jul 10, 2017 @ 8:00AM - 05:00PM
M30 Review Project Meeting
The next project meeting of the E2VENT project will take place during 10th-12th July in Brussels, Belgium. Partners from across Europe will come together to review, discuss and evaluate the project’s progress and to plan next steps. Besides participants from the consortium, the meeting will be attended by the Project Officer from the European Commision. We look forward to meeting our partners again and to the opportunity to get feedback from all sides.
Mon Jul 03, 2017 @ 8:00AM - 05:00PM
PASSIVE LOW ENERGY ARCHITECTURE CONFERENCE
One of our partners NOBATEK will participate in the Passive Low Energy Architecture (PLEA) Conference held in Edinburgh, 3rd to 5th July 2017 to present a paper related to the LHTES and E2VENT project. The title of the paper is: “E2VENT: an energy efficient ventilated façade retrofitting system. Presentation of the embedded LHTES system."
PLEA is a global network that has led a worldwide discourse on sustainable architecture and urban design through its conferences since 1982. It has a membership of thousands of professionals, academics, students and industry members from over 40 countries.
More info: www.plea2017.net
Fri Jun 30, 2017 @ 8:00AM -
Fourth release of the project newsletter
We are pleased to inform you that the E2VENT project released the fourth newsletter. It includes all the news connected with this phase of the project. You can subscribe to get the newest information about the project via the form the on the bottom of this website.
Mon Jun 19, 2017 @ 8:00AM -
The E2VENT project participated in a speaking slot during the EU Sustainable Energy Week 2017 which will take place 19th–25th June 2017 in Brussels, Belgium. The E2VENT project was represented there by NOBATEK.
The Policy Conference is the most important European conference dedicated to sustainable energy policy issues. Sessions organized by the European Commission and energy stakeholders debate new policy developments, best practices and sustainable energy ideas while networking events forge alliances. Awards for outstanding projects begin the week.
Read more: www.eusew.eu
Sun Jun 11, 2017 @ 8:00AM -
NSB 2017 - Nordic Symposium on Building Physics
NSB 2017 - Nordic Symposium on Building Physics
11-14 June 2017
The Nordic Symposium on Building Physics (NSB) 2017 was a focus on the energy and hygrothermal performance of buildings and constructions.
Contributions were invited dealing with experiences from practice, experiments, simulations or the development of new models focusing on one of the following topics:
Building envelope systems;
Moisture transport and safety;
Air-tightness and air movement;
Energy efficiency and retrofitting;
Zero Emission Buildings;
Climate change and climate adaptation of buildings;
Moisture, mould and indoor climate;
Building material properti.
The E2VENT project was represented by DAPPOLONIA.
Tue May 16, 2017 @12:00AM
First testings on the test bench in Anglet
As the SMHRU and LHTES are now installed on the test bench in Anglet (Nobatek), a series of onsite tests is ongoing. Among those, we can list the following:
Value coming from the sensors
Forced piloting of the ventilators and dampers by the use of the GUI of the BEMS
Automatic piloting of the ventilators and dampers based on the piloting algorithm implemented in the BEMS
Air tightness tests (see video)
Next step is to place the mineral wool board to insulate the cell, and to place the anchorings, profiles and cladding for the ventilated façade.
Mon May 15, 2017 @ 8:00AM -
ICBEST 20177 - International Conference on Building Envelope System and Technologies
15–18 May 2017
Paolo Basso from D’Appolonia presented a paper related to the E2VENT project during the International Conference on Building Envelope Systems and Technologies (ICBEST), which took place 15th–18th May 2017 in Istanbul. The presentation was dedicated to the design of the E2VENT and its integration with the building system.
ICBEST is a worldwide forum for building envelope architecture and engineering. It provides information exchange, networking, and discussions of recent developments and their application thus bridging the gap between architects, designers, engineers, manufacturers, and researchers. During the industry exhibition, top international companies will be showcasing products and technology solutions of interest to conference attendees.
Read more about the conference: www.icbestistanbul.com
More pictures in Gallery.
Wed Apr 26, 2017 @ 8:00AM -
IBF – International Building Fair
The E2VENT project will be exhibited by FENIX TNT at the International Building Fair in Brno, Czech Republic. The event will take place on the 26th – 29th March, 2017.
Fairs in Brno are well known for unique presentation of all aspects of housing and house constructions, building management services, technical solutions, equipment, interior design and furniture. Visitors can learn about the latest developments, trends, products and services in various fields.
More pictures here.
Mon Apr 03, 2017 @12:00AM
SMHRU & LHTES installation on test bench
After measurements carried out in the laboratories of TECNALIA and NOBATEK, new version of the SMHRU and LHTES have been designed and next manufactured by ELVAL. The systems were next sent to Anglet in order to be assembled and installed on the test bench.
Regarding the LHTES, in this version the Phase Change Materials in the LHTES are encapsulated in phase change materials. Custom-made dampers allow to change effectively from one circuit to another while ensuring air tightness.
The assembling and installation process was assessed, and first feedbacks were analysed.
The BEMs allow to collect the data measured by the sensors and pilot effectively both systems.
A series of onsite tests will now be carried out.
Mon Mar 06, 2017 @12:00AM
Test bench, and renovation of the reference cell with ETICS
The test bench that will be used is located in Nobatek, in Anglet, France. It will be used in order to carry out the first renovation with the E2VENT module in order to test, improve and finalize its design, installation process and its control. Then it will allow to compare the overall energy efficiency of the E2VENT Module against competitive solutions.
The test bench is composed of three cells that will all be renovated with different systems:
Cell West: the cell that will be considered as a reference renovated with ETICS
Cell Center: a cell renovated with a ventilated façade without any HVAC systems
Cell East: E2VENT renovation, with a SMHRU and LHTES with the associated BEMs
During the first period, some works on the test bench were carried out. Windows were taken out, and concrete blocks were built on the three cells. It represent the low efficient walls from the 70’s.
Next step is to install the SMHRU and LHTES on the test bench.
More pictures here.
Tue Feb 28, 2017 @ 8:00AM -
Wed Feb 22, 2017 @ 8:00AM - 05:00PM
The next general meeting (M24) will take place in Anglet, France on the 22nd and 23rd of February. This meeting is the opportunity to evaluate the project progress. It will take place few days after the test bench retrofitting and will bring about a workshop concerning any needed redesign concepts for the prototypes based on the feedbacks received. Various other workshops will be conducted in order to deal with the retrofitting of the pilot buildings in Gdansk and Burgos.
During the E2VENT general meeting, a video showing the demo sites, interviews and projects advances will be filmed. The outcome of the filming will be the new project video.
Wed Jan 25, 2017 @ 8:00AM - 12:00AM
The E2VENT project was exhibited during BRIMEE Conference organized by FENIX TNT. The conference took place on the 25th January 2017 at the Rectorate Brno University of Technology in Brno, Czech Republic.
Participants of the conference had a chance to see presentations about various topics linked to green materials, new technologies and innovations in the construction sector. The event was concluded with the BRIMEE project demo site visit, where panels made of the Nano Crystalline Cellulose foam have been installed.
Thu Jan 19, 2017 @ 8:00AM -
19 January 2017
The PowerSkin Conference aims to address the role of building skins to accomplish a carbon neutral building stock. Topics such as building operation, embodied energy, energy generation and storage in context of façades, structure and environment are considered.
The E2VENT project was represented by DAPPOLONIA.
Mon Jan 16, 2017 @ 8:00AM -
The E2VENT project was exhibited by FENIX TNT on BAU17, the World’s Leading Trade Fair connected with civil engineering, which took place in Munich, Germany on the 14th – 19th January 2017. BAU presented a display of architecture, materials and systems for commercial and residential construction and interior design, for both new-build and R&M projects.
Every year around 2,000 exhibitors from more than 40 countries showcases a comprehensive range of materials and technologies for planning and construction.
Wed Nov 23, 2016 @ 8:00AM - 12:00AM
AMANAC workshop in Milan
The public AMANAC workshop was organized by FENIX TNT and D'Appolonia S.p.A., on the 23rd November 2016 in Milan, Italy.
The topic of the workshop was „How to reduce the gap between research and market uptake“.
The aim of the workshop was to identify and analyse drivers and barriers for the market uptake of innovative products or services, by involving key European stakeholders from the “Construction & Building value chain”. The AMANAC WORKSHOP was organized under the aegis of ECO-Binder, AMANAC and BRIMEE projects which were also presented. The workshop was attended by both professional and general public, and by the project’s partners representatives. During this event, the E2VENT project was represented.
Thu Nov 17, 2016 @ 8:00AM - 12:00AM
ECTP conference in Brussels
During the ECTP conference, taking place in Centre for Fine Arts, in Brussels, Belgium on the 17th –18th November 2016, NOBATEK and FENIX TNT presented the E2VENT project.
The aim of the ECTP CONFERENCE was to present and discuss current and anticipated innovation in the field of built environment. High-level speakers from academia, industry and the European Commission introduced global schemes and visions from various stakeholders. The aim of the conference was to address diverse issues under the five priority areas of the ECTP: active aging and design; energy and efficient buildings; heritage and regeneration; infrastructure and mobility; and materials and sustainability. During the event, booths and posters of innovative European projects were exhibited to the participants of the conference.
Mon Oct 17, 2016 @ 9:00AM - 05:00PM
Mon Oct 17, 2016 @ 8:00AM - 05:00PM
SBE conference in Thessaloniki
The conference Sustainable Synergies from Buildings to the Urban Scale held in Thessaloniki were organized by the school of Civil Engineering of The Aristotle Univertisty of Thessaloniki that are partners of the E2VENT Project.
A session was organized around the E2VENT project and five presentations were given:
E2VENT: an energy efficient ventilated façade retrofitting system. Presentation of the embedded LHTES system (Antoine Dugué, Nobatek)
Development of a Smart Modular Heat Recovery Unit adaptable into a ventilated façade (Asier Martinez, Tecnalia)
Analysis of the thermal bridging effect on ventilated facades (Theodoros Theodosiou, AUTH)
Energy performance simulation of a ventilated façade retrofitting system (Thierno Diallo, UHULL)
Thermal performance investigation in cooling season for a corner double skin façade with rotating glass louvres (Pavlos Vatavalis, European Aluminium)
Mon Oct 10, 2016 @ 8:00AM - 12:00AM
11th Conference on Advanced Building Skin
E2VENT project was presented on 11th Conference on Advanced Building Skin in Bern! DAPPOLONIA representative acquainted the participants with the E2VENT system on 10th October during afternoon session called „Products and Technologies for Building Refurbishment 2".
Mon Sep 05, 2016 @ 8:00AM - 12:00AM
Tue Aug 09, 2016 @ 8:00AM - 05:00PM
First SMHRU and LHTES prototypes (M18)
The SMHRU (Smart Heat Recovery Unit) and LHTES (Latent Heat Thermal Storage) systems have been manufactured by ELVAL COLOR, according to the designs made by TECNALIA and NOBATEK.
Both systems correspond to heat exchangers that are integrated into Etalbond casings to be installed on the façade of the buildings to be renovated.
The SMHRU is an air renewal system to ensure a high indoor air quality for the flats to be renovated. It embeds a heat recovery unit allows to limit the thermal losses.
The LHTES is a designed to store the external potential energy in order to use it for heating or cooling. Therefore, it can be seen as a complementary system to the SMHRU with high performance for heating and cooling especially aiming at reducing the peak loads.
More pictures here.
Tue Jul 05, 2016 @ 8:00AM - 12:00AM
Thu Jun 30, 2016 @ 8:00AM - 12:00AM
Second E2VENT newsletter
The second newsletter was released! Subscribe on our website to get the newest information about the project!
The newsletter you can find also in Documents section!
Thu May 05, 2016 @ 8:00AM - 12:00AM
Wed Apr 20, 2016 @ 9:00AM - 05:00PM
International Building Fair
20-23.4. 2016, Brno, Czech Republic
A unique presentation of all aspects of housing and house constructions, building management services, technical solutions and equipment.
Special focus: energy saving and financing.
Fenix participated this event and presented there the E2VENT project.
Wed Jan 06, 2016 @ 8:00AM - 05:00PM
Wed Dec 02, 2015 @ 9:00AM - 05:00PM
M12 meeting in Barcelona, Spain
M12 progress meeting was held 2nd-4th December 2015 in Barcelona (Spain) and was hosted by Picharchitects.
This meeting corresponds to the end of the first year of the E2VENT project.
Tue Dec 01, 2015 @12:00AM