New video by FASADA
Monday 26 February 2018, 08:00am - 05:00pm

FASADA made a video capturing the whole installation of the E2VENT system at demo building in Gdansk, Poland.



Past News

Wed Apr 03, 2019 @12:00AM
New project flyer

Our project successfully finished, but we are still happy to share our ideas and results!

Check our newest flyer HERE.

And you can find more information about our results on a website that presents the solution of E2VENT project.

new flyer

Mon Jun 25, 2018 @ 8:00AM -
E2VENT project FINAL meeting

The E2VENT project has come, after 42 months, to its end. On Wednesday, 27th of June, the last meeting will take place at the European Aluminum Association premises and the partners will present the final outcomes resulting from the research and development activities performed under the E2VENT project. Both technical and non-technical aspects of the Project will be shown to the EC representatives and the meeting will also serve as an opportunity for them to provide the consortium with valuable feedbacks. To conclude with the words of the coordinator, “the management of the E2VENT was a personal challenge; however, I feel proud of the accomplished results”. We wish all partners the best of luck in the future optimization of the results and successful journey to the market.

Logo projektu E2VENT NBK

Wed Jun 06, 2018 @12:00AM
Last E2VENT workshop is approaching – meet us in Madrid!

We are pleased to invite you to an Energy Efficiency public workshop to be held on 12th June in Madrid from 08:30 to 14:30.
The workshop will focus on innovation trends, opportunities and challenges in Building Energy Efficiency, reviewing several study cases and European Commission initiatives where energy efficiency technologies have been successfully integrated in buildings achieving high performance and energy savings.
Find the details in our special section "Workshop Madrid"


Sun Jun 03, 2018 @12:00AM
Successful E2VENT workshop in Prague

FENIX TNT, in cooperation with the Technology Centre of the Czech of Sciences. Technology Centre provided the premises, and 30 participants met there at the workshop “E2VENT project – Horizon 2020 in practice” that took place on 30th May 2018. The workshop consisted of three parts, each part followed by a panel discussion. The first part focused on European projects in general, programme Horizon 2020 and research and development. The second part aimed to present the E2VENT project as a reference example of the H2020 project, its life cycle and results achieved so far. Three project partners including TECNALIA, ACCIONA CONSTRUCTION, and RINA CONSULTING represented the project.

Presenters in the last part of the workshop focused on the innovations and legal issues. In this part, project partner from PICH ARCHITECTS represented the E2VENT project and also introduced trends and innovations in the construction industry from the architects´ point of view. The workshop was attended mainly by local experts dealing with eco-innovation. During the discussions, participants were very interested in the topic of operation of project consortia, the advantages and disadvantages of participation in projects, the development of innovations, cooperation between development centres and businesses, and legal issues. After the workshop, participants had a chance to visit University Centre for Energy Efficient Buildings of Czech Technical University in Prague.

34415889 798241257045699 1311833731190751232 o

Tue May 29, 2018 @12:00AM
ICAE 2018

ICAE 2018 is an event organized by Tecnalia dedicated to providing better understanding of current and future architectural envelopes and their components, focusing on trends, technologies and developments. The conference took place from 20th to 22nd June 2018 in San Sebastian, Spain. NOBATEK introduced the E2VENT project during the workshop called “Accelerating building refurbishment in Europe thanks to innovative solutions: challenges and potential routes to overcome them”, while CARTIF and TECNALIA presented the individual parts of the E2VENT solution.

ICAE2018 logo en


Sun May 20, 2018 @12:00AM
E2VENT workshop in Prague is coming!

FENIX TNT, in collaboration with Technology centre CAS, organizes a workshop named “E2VENT project – Horizon 2020 in practice”. The workshop takes place on May 30, 2018 in Prague at the facility of Technological centre.
The goal of the workshop is to present the E2VENT project, which developed innovative ventilated façade system; and to introduce the topic of research projects funded by the EU. In addition, participants will be informed about possible options for joining such projects. The panel discussions will offer a possibility to discuss specific questions regarding the given topic and networking section will allow participant to gain valuable contacts.
The workshop will be held both in English and Czech.
The participation to the workshop is free of charge, registration HERE.
Download the full agenda HERE.

tc budova s logem low 350x226

Thu May 10, 2018 @12:00AM
Report from the E2VENT Workshop in Brussels

European Aluminium organized E2VENT public workshop on 19th April in Brussels, attended by 50 participants.
The workshop tackled innovation in the renovation sector and opportunities and challenges under the coming new EU’s Energy Performance of Buildings Directive (EPBD), approved by the European Parliament on 17th April.
The first panel included representatives from European Commission DG ENERGY, Renovate Europe and experts from Belgium and Greece. The outcome of the discussions is that the new EPBD should contribute to increase renovation rates but that other financial and legal instruments as well as Concerted Action with Members States will be equally important. The second panel included speakers from European Construction Technology Platform and E2VENT project partners.

32266317 782555235280968 2819886724086235136 o

Wed May 02, 2018 @12:00AM
FENIX TNT represented the E2VENT project at Building Fairs in Brno

Fenix team represented the E2VENT project at Building Fairs in Brno, Czech Republic. From 25. to 28.4. 2018 visitors had a chance to see a unique presentation of all aspects of housing and house constructions, building management services, technical solutions and equipment. It was a great networking opportunity for FENIX to communicate with professionals and wide public about the European research projects.
More information about the event HERE.

31719048 779366552266503 5335499307585896448 n

Wed Apr 25, 2018 @ 8:00AM - 05:00PM
International Building Fair in Brno 2018

FENIX TNT will present the E2VENT project during the International Building Fair in Brno (Czech Republic).

International Building Fair is a 4-day event being held from 25th to 28th April 2018 at the Brno Exhibition Centre in Czech Republic. This event showcases products like economic growth and the inflow of foreign capital and is regarded as a very promising market. It is growing rapidly, and numerous projects in the field of road construction, house building and the construction of office premises are planned etc. in the Building Construction industry.

Mon Apr 09, 2018 @12:00AM
Final video of the E2VENT project is online!

We proudly share with you the final promo video of the E2VENT project!
The video was created by FENIX and includes interviews with the project partners as well as installation process of the E2VENT system. The installation process was filmed on the project demosites in Burgos (Spain) and in Gdansk (Poland).
Watch the video HERE. (The video is also available with Czech subtitles)


Mon Feb 26, 2018 @ 8:00AM - 05:00PM
New video by FASADA

FASADA made a video capturing the whole installation of the E2VENT system at demo building in Gdansk, Poland.


Wed Jan 31, 2018 @ 9:30AM - 02:30PM

We are pleased to invite you to the E2VENT WORKSHOP which will be held within BUDMA - International Construction and Architectural Fair in Poznan, Poland.

The workshop will take place on 31st January 2018 and will include not only the introduction of the E2VENT project but also interesting presentations in the field of energy efficiency and ventilation facades. Don't miss a unique opportunity to meet and discuss with leading European representatives of research and development of innovative building materials.

Registration free within the BUDMA fair.
For more information and detailed agenda, download the flyer here.

E2VENT BUDMA workshop flyer

Tue Jan 30, 2018 @ 8:00AM - 05:00PM
The E2VENT project was represented by FENIX at BUDMA Fair in Poznan, Poland

BUDMA is the largest construction fair in Poland and Central and Eastern Europe with more than 800 exhibitors from all over the world. It´s a unique opportunity to introduce new products to wide public and a rich source of latest market information. The E2VENT project was presented via booth, roll-up, video, gadgets, and brochures by FENIX. The fair took place in Poznan, Poland 30.1.-2.2.2018.

555C257E870BF5061234D86D9E485BDBD8F99F733A5526ED91pimgpsh fullsize distr